Sorry, you have reached the limit of items that can be dropped into the batch window at once.
Please drop items in two or more smaller groups.
The file is locked.
The real length of this AIFF file does not correspond to the number of frames it claims to have. Probably the file is damaged.
If you are having problems processing this file you can open it as "Raw" and "Save As" it again (see manual).
This AIFF file has an inconsistent number of frames. If you should encounter problems with this file, make a "New Audio File" and copy the contents of this file into the new file. Then delete this file and work with the new copy.
There is already a copy of this application running with the same serial number.
Please quit the other application or buy a second user license.
The CD file could not be imported completely because an error occurred.
Probably the destination disk is full or the CD is in a format not supported by the currently installed QuickTime version.
Sorry, you can save tracks only in the full version of sonicWORX.
Playback or recording could not be started because the currently selected input and/or output channels could not be activated.
Please choose "Audio Setup…" from the "File" menu and select different input/output channels.
The CD track(s) cannot be imported because the QuickTime importing services are not available.
Please check that all of your QuickTime extensions are installed and active.
Platzhalter f├╝r den "No Selectable Drivers" Fehlercode
Sorry, the current ASIO driver could not be activated because it is used by another application or because it could not find the appropriate audio hardware.
The "Audio Setup…" window will be opened where you can select another driver.
Sorry, but currently 8 bit PAF files are not supported.
You cannot open an unnamed new audio file because the work file volume is full.
Please save the file on another volume.
There is not enough space on the volume for temporary files to process the selected range (^2 MB missing).
Close the file, choose a workfile folder on a different volume (use the Preferences dialog to do this) and reopen the file.
The sonicWORX preferences file could not be written (system booted from a locked volume?).
Please choose a folder for storing sonicWORX' temporary files (click OK now to proceed to the selection dialog).
To process the file, first make a selection inside the waveform display.
To make a selection, click & drag inside the waveform display.
To select the whole file for processing, choose "Select All" from the "Edit" menu.
To process the file, please choose an offline plugin first.
To choose an offline plugin, use the "Offline" menu. The menu is divided into categories, which in turn contain the corresponding plugins.
The folder for the temporary files could not be found (hard disk switched off?) or is not writable (running from a CD?).
A temporary folder on the boot volume will be used instead. Choose "Preferences…" from the "File" menu if you like to change this.
The folder for the temporary files could not be found. Maybe the volume is not mounted (external hard disk switched off?). Also, the boot volume seems to be write protected.
Please choose any other volume which is not write protected. Click OK to do so.
An "End-Of-File" error has occurred, because there is data missing at the end of the file. Probably the file is damaged.
You can still try to open the file "As Raw" and save it again.
The current ASIO driver could not be reactivated because it is in use by another application.
Quit the other application or choose a different driver in the "Audio Setup" dialog.
There is not enough space on this volume to save all the selected tracks.
Please choose a different volume or select fewer tracks to save.
There are no tracks defined in this audio file.
Please use the "Set Track Start Marker" and "Set Track End Marker" menu commands from the "Markers" menu to define tracks.
This copy of sonicWORX was not installed correctly. Please use the original "Installer" application to install the software again
(version mismatch).
This copy of sonicWORX was not installed correctly. Please use the original "Installer" application to install the software again.
Please remember that using alternative System Folders requires to run the Installer once per active System folder.
You have selected a recording samplerate that differs from the current input sampling rate, but the automatic sampling rate conversion is switched off.
The audio input will be converted with the highest quality algorithm.
The recording has been stopped because the destination hard disk is too slow.
Try to set the "Disk Block Size" to a higher value (choose "Audio Setup" from the "File" menu).
There are no drivers in the "ASIO Drivers" folder.
Please make sure that the folder "ASIO drivers" contains at least one ASIO driver.
You cannot play back this file because its sampling rate does not match the current output sampling rate.
Activate the sampling rate conversion (choose "Audio Setup" from the "File" menu and set "SRC Quality" to anything other than "No Conversion").
Sorry, the current ASIO driver could not be activated because it is used by another application or because it could not find the appropriate audio hardware.
The "Audio Setup…" window will be opened where you can select another driver.
Could not initialize the ASIO drivers because of an error ^1.
The folder "ASIO drivers" could not be found.
Please make sure that the folder named "ASIO drivers" is in the same folder as the application.
You cannot drop that type of item onto this window.
Please drop only 1 item at a time.
The file you opened is not an effect file for the "^0" plugin.
The plugin "^0" cannot be loaded because it is not compatible with this version of sonicWORX.
The plugin "^0" which is needed by this document is currently not available in the plugins folder or was not loaded at startup.
Sorry, you cannot record a file on this volume because there is not enough free space.
Sorry, this alias could not be resolved.
Sorry, one or more of the selected files could not be opened because it is corrupted or not of a readable format.
Sorry, 24bit System Sound files are currently not supported.
Sorry, you cannot import this type of Sound Resource File in sonicWORX.
File "^3": Sorry, you cannot open this type of WAV file in sonicWORX.
Sorry, this file is currently in use. Please close the file first.
The word sizes of one or both of the files you selected are greater than the destination file's word size.
To avoid a loss in audio quality, select "Import Split Stereo…" again and select a higher word size.
Sorry, the files you selected are of different length.
Sorry, the sampling rates of the files you selected do not match together or with the destination file.
Sorry, this file is a stereo file.
When importing "Split Stereo" files, both files have to be mono files.
Sorry, this file seems to be damaged or unreadable. Please try to open it with "Open…" first and see if it is a valid audio file.
You cannot change the input options of the currently selected sound input device now because it is in use by another application.
The currently selected sound input device does not support user changeable options.
The sound input device is busy.
Perhaps another application is using it or the "Direct Input" option is activated.
The sound input or output device could not be activated.
Please check the input and output settings in the "Sound" control panel.
The alias "sonicWORX temp files" could not be resolved properly.
Please make a new alias of the folder for sonicWORX' temporary files and restart sonicWORX.
An alias could not be resolved properly.
This AIFF file seems to be corrupted (SSND chunk is missing).
This AIFF file seems to be corrupted (AIFF chunk is missing).
This AIFF file seems to be corrupted (FORM chunk is missing).
The operation could not be completed because the requested file was not found.
Perhaps it has been moved while it was open.
The operation could not be completed because there is not enough memory.
Try closing some windows or increasing the memory partition.
You cannot replace this file because it is in use.
There is no sound input device selected. Open the control panel "Sound" and select a sound input device.
This Sound Designer file cannot be opened because some resources are missing. Try to open it as a "raw" file and specifiy 0 bytes as offset. Then you can "Save as" it as a Sound Designer file again.
The operation could not be completed because there is not enough free space on the selected volume or on the workspace volume.
